MaxLink PoE switch PSBT-19-16P-250, 18x LAN/16x PoE 250m, 1x SFP, 802.3af/at/bt, 200W, 10/100Mbps

PSBT-19-16P-250
The PSBT-19-16P-250 is a 24-port 10/100Mbps PoE switch with two more Gigabit LAN ports. Only one is a LAN/SFP combo. Automatically detects and powers device supporting PoE standard 802.3af/at (max.30 W/port) on ports 1 to 16, on port 1 and 2 it even supports PoE standard 802.3bt (60 W). Ports 17 an... More information

Product description

The PSBT-19-16P-250 is a 24-port 10/100Mbps PoE switch with two more Gigabit LAN ports. Only one is a LAN/SFP combo. Automatically detects and powers device supporting PoE standard 802.3af/at (max.30 W/port) on ports 1 to 16, on port 1 and 2 it even supports PoE standard 802.3bt (60 W). Ports 17 and 18 serve as uplinks and do not support PoE. The total budget for powering connected devices is 200 W using an internal power supply. The switch automatically balances power for each port according to the device's consumption. The switch can be mounted in a 19" rack thanks to the included accessories.

802.3bt support!

Ports 1 and 2 also support the 802.3bt standard, where output power up to 60 W is available for the connected devices! Switches are now newly equipped with a Watchdog feature. If Ethernet link has not been detected for about 1 minute and power consumption is active, the power supply will be interrupted and the connected device will be restarted.

Switch has a manual mode switching

  • Normal "N": The switch supplies power to the device at a distance of max. 100 m. The throughput of the switch per port is 10/100 Mbps.
  • VLAN: Ports are logically separated from each other, in this mode you can prevent unwanted broadcast storms. The switch powers the device up to 100m and the throughput per port is 10/100 Mbps.
  • 250 m: The switch powers devices up to 250 m with a reduced throughput of 10 Mbps per port.

Wide use of poe

With this switch, you can power a wide range of IP cameras, VoIP phones, WiFi APs and other devices that support the 802.3af/at standard.

Package Contents

  • Device
  • Ears up to 19" racks
  • Power cord

Specifications

Connectors and Interfaces

LAN speed:(16) 10/100Mbps + (2) 10/100/1000Mbps
Optical interfaces:(1) 1000Mbps Combo

Power

Power type:Mains power (230V)
PoE type:PoE-Out (only)
PoE-Out standards:802.3af, 802.3at, 802.3bt
PoE Out ports:16
PoE budget [W]:200
Long range PoE - up to 250m:Yes
Max. power consumption [W]:200
Power via connector/terminal:230V AC

Physical characteristics

Design:Rackmount
Fans:(2) 40 x 40 mm
Chassis design:Metal
Buttons:Normal / VLAN / 250m
Operating temperature [°C]:-10 up to 55
Height [mm]:45
Depth [mm]:195
Width [mm]:295

General

Packet forwarding rate [Mpps]:5,4
Switchning capacity [Gbps]:7,2
MAC address table:8000
Jumbo frame [Bytes]:10240

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies. Find more information.

All rights reserved © 2022 - Discomp s.r.o.

server: IIS01, userIP: 3.225.221.151